Tuesday, September 15, 2009

NetManage Chameleon NFS 4.5,TCP/IP Configuration Guide

To Install Chameleon NFS, put Install Disk 1 in the floppy drive.

Start up Windows 3.1.

Choose File, Run.

Enter a:\setup

This will bring up the Registration Window.

1.gif

Enter the Serial Number in the Serial Number box. Enter the Key in the Key box. (Both of these values should have been provided with the software.)

Click on Continue.

2.gif

Enter the path where the files will be installed. Using the default C:\NETMANAGE is fine.

If you would like to change this, enter the new path in the ChameleonNFS box.

Click on Continue.

Messages will inform you that some of the PC's setup files (AUTOEXEC.BAT, CONFIG.SYS, etc.) are going to be changed and backups made. Auto configuration starts up.

3.gif

Respond to the Add prompt:

* Name: Ethernet0
* Type: Ethernet

Click on OK.

4.gif

Respond to prompts for Hardware information.

* Choose the manufacturer of your Ethernet Card from the Vendor list.
* Choose the manufacturer of your Ethernet Card from the Vendor list.
* Respond to the card parameters prompt. (See your Ethernet card's documentation for these values.)

Click on OK.

Click on OK.

5.gif

Enter the IP address of this workstation (a.b.c.x), then click on OK.

The Subnet Mask window displays.



The Subnet Mask for an unsubnetted Class C address is 255.255.255.0 with no subnet bits.

If you are using an assigned 38 net address, the values may be 255.0.0.0 with the Number of subnet mask bits = 16.
Click on OK.

The Host Name window displays.

7.gif


Enter the host name of this PC in the Host Name box, then click on OK.
The Domain Name window displays.

8.gif

Enter your assigned Internet domain name in the Domain Name box, then click on OK.

The Default Gateway window displays.

9.gif

Enter the IP address of your router in the first slot of the Default Gateway box, then click on OK.

Next you need to add the DNS resolvers.

From the Custom window choose Setup, DNS.

10.gif


The Domain Servers window displays.

11.gif

Choose the two physically closest machines from the list of DNS name resolvers.

Enter the IP address of the closest machine in the top slot. Enter the IP address of the second closest machine in the next slot.
Click on OK.
From the Custom window choose File, Save to save the new configuration.

Restart the PC.

1 comment:

  1. Is possible send to my email a copy of the "NetManage Chameleon NFS 4.5"? Thanks!
    email: alexdedalus@hotmail.com

    ReplyDelete